[an-ts]

To connect your FX processor to your mixer, you’ll typically need to use the Auxiliary (Aux) or Effects Send and Return jacks on both devices. Here’s a simple step-by-step guide:

1. First, make sure your FX processor is powered on and in bypass mode, meaning it’s not actively processing any effects.

2. On your mixer, locate the Auxiliary (Aux) or Effects Send controls. These are often knobs or sliders that adjust the level of a specific channel being sent to an external device.

3. Choose an available Aux send on your mixer. You’ll use this to send a copy of your audio signal to the FX processor.

4. Connect a cable from the chosen Aux Send jack on your mixer to the Input jack on your FX processor. This could be a ¼ inch jack for line